K. Elangovan

Arulprakasajothi, M. ., Elangovan, K. ., Reddy, H. ., & Suresh, S. . (2015). Heat Transfer Study of Water-based Nanofluids Containing Titanium Oxide Nanoparticles. Elsevier Ltd. https://doi.org/10.1016/j.matpr.2015.07.123

Kulkarni, M. ., Elangovan, K. ., & Hemachandra, R. . (2013). Effects of electroplating on the mechanical properties of injection molded thermoplastics. International Journal of Plastics Technology, 17(2), 163-170. https://doi.org/10.1007/s12588-013-9056-6

Kannan, S. ., Senthilkumaran, D. ., & Elangovan, K. . (2013). Development of composite materials by rapid prototyping technology using FDM method. IEEE Computer Society. https://doi.org/10.1109/ICCTET.2013.66759066

Arulprakasajothi, M. ., Elangovan, K. ., Reddy, H. C., & Suresh, S. . (2016). Experimental investigation on heat transfer effect of conical strip inserts in a circular tube under laminar flow. Frontiers in Energy, 10(2), 136-142. https://doi.org/10.1007/s11708-015-0389-z

Baligidad, S. ., Elangovan, K. ., & Gopi, S. . (2016). Selective inhibition sintering: Advancements & systematic research approaches for the process development. International Journal of Applied Engineering Research, 11(10), 7058-7062.

Kulkarni, M. ., Elangovan, K. ., Reddy, K. ., & Basappa, S. . (2016). Tribological behaviours of ABS and PA6 polymermetal sliding combinations under dry friction, water absorbed and electroplated conditions. Journal of Engineering Science and Technology, 11(1), 68-84.

Arulprakasajothi, M. ., Chandrasekhar, U. ., Elangovan, K. ., & Yuvarajan, D. . (2020). Influence of conical strip inserts in heat transfer enhancement under transition flow. International Journal of Ambient Energy, 41(5), 511-516. https://doi.org/10.1080/01430750.2018.1472651

Baligidad, S. ., Chandrasekhar, U. ., Elangovan, K. ., & Shankar, S. . (2019). Investigation of parameters influencing mechanical properties in SIS by using RSM. International Journal of Materials and Product Technology, 58(2-3), 178-200. https://doi.org/10.1504/IJMPT.2019.097666

Baligidad, S. ., Chandrasekhar, U. ., Elangovan, K. ., Shankar, S. ., Anjankumar, N. ., & Supriya, J. . (2018). A study on influence of process parameters on the SIS processability and mechanical properties of a HDPE. Elsevier Ltd. https://doi.org/10.1016/j.matpr.2018.10.355

Baligidad, S. ., Chandrasekhar, U. ., Elangovan, K. ., Shankar, S. ., & Kaup, V. . (2018). Processing of PA2200/HDPE by SIS: Effect on microstructure and mechanical properties. International Journal of Microstructure and Materials Properties, 13(3-4), 185-197. https://doi.org/10.1504/IJMMP.2018.096143