Baligidad, S., Chandrasekhar, U., Elangovan, K., Shankar, S., & Kaup, V. (2018). Processing of PA2200/HDPE by SIS: Effect on microstructure and mechanical properties. International Journal of Microstructure and Materials Properties, 13(3-4), 185-197,. https://doi.org/10.1504/IJMMP.2018.096143
MECH
Arulprakasajothi, M., Elangovan, K., Chandrasekhar, U., & Suresh, S. (2018). Experimental study of a water-based titanium oxide nanofluid in a circular pipe with transition flow and conical strip inserts. Heat Transfer Research, 49(5), 439-456,. https://doi.org/10.1615/HeatTransRes.2018015783
Arulprakasajothi, M., Elangovan, K., Chandrasekhar, U., & Suresh, S. (2018). Performance study of conical strip inserts in tube heat exchanger using water based titanium oxide nanofluid. Thermal Science, 22(1), 477-485,. https://doi.org/10.2298/tsci151024250a
Sagar, M., & Elangovan, K. (2017). Consolidation & factors influencing sintering process in polymer powder based additive manufacturing. Institute of Physics Publishing. https://doi.org/10.1088/1757-899X/225/1/012075
Equbal, M., Equbal, A., Equbal, M., & Pranav, R. (2018). Optimisation of forging parameters of 35C8 steel using grey relational analysis. Inderscience Publishers. https://doi.org/10.1504/IJMMP.2018.096144
Kavitha, S., Kulkarni, S., Suresh, R., & Shivanna, D. (2020). Effect of electrical resistance on ramp rate in cold end portion of SiC heating elements. Elsevier Ltd. https://doi.org/10.1016/j.matpr.2020.06.588
Karthik, R., Elangovan, K., Girisha, K., & Shankar, S. (2022). Experimental investigation on wear behaviour of laser sintered and unsintered Inconel 718 in vibratory finishing. Elsevier Ltd. https://doi.org/10.1016/j.matpr.2022.04.201
Pasha, K., & Manjunath, T. (2021). Analysis of Crack Growth Behavior of Fan Rotor Blade Under Centrifugal Force. Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-981-16-2086-7_10
Karthik, R., Elangovan, K., Shankar, S., & Girisha, K. (2022). An experimental analysis on surface roughness of the selective laser sintered and unsintered Inconel 718 components using vibratory surface finishing process. Elsevier Ltd. https://doi.org/10.1016/j.matpr.2022.04.448
Karthik, R., Elangovan, K., & Girisha, K. (2021). Tribological characterization of the LASER sintered and unsintered Inconel 718 in dry sliding condition. Elsevier Ltd. https://doi.org/10.1016/j.matpr.2021.04.556
